Home » Forklift Attachments & Accessories

Catalog 35 products

Forklift Attachments & Accessories

Fork-mounted attachments that extend what a standard forklift can safely handle, coils, drums, wide loads, tongs, and load tie-downs.

Request a Quote Talk to a Specialist

Forklift Attachments

Forklift Attachments

Forklift attachments mount to the forks or carriage of a standard forklift and extend what it can handle beyond a bare pallet on bare forks, fork extensions for longer or wider loads, coil rams for steel and paper rolls, lifting tongs and clamps for specialty loads that don't sit on a pallet, spreader beams for wide or unbalanced freight, and tie-down clamps for securing a load in transit. Most bolt or slide onto forks already in use; none of it requires a different truck.

The buying decision comes down to what the standard fork setup can't do on its own, a load that overhangs the forks, a coil with no pallet under it, a drum that needs to stay upright, or freight that needs to be strapped down before it moves. Every attachment here is rated for a specific capacity and has to be matched to the forklift's rated load, not just bolted on and assumed to work.

Fork Extensions vs. Load-Specific Attachments

Matching Attachment to Load

Fork Extensions vs. Load-Specific Attachments

Fork extensions, including loop-style extensions, slide over existing forks to add reach for longer or wider loads without swapping the forks themselves. A fork extension storage rack keeps a set organized and off the floor between uses, which matters once a facility is running more than one pair.

Coil rams, die lifting tongs, and telescoping spreader beams solve a narrower problem: a load that doesn't sit flat on a pallet. Coil rams pick up rolls and coils through the eye; tongs grip die castings and similar irregular loads directly; spreader beams distribute a wide or unbalanced load across two lift points instead of one. Tie-down clamps handle the other half of the job, keeping a load secured to the forks or a pallet once it's picked up and moving.

Applications

What Standard Forks Can't Handle

Long & Wide Loads

Fork extensions add reach beyond the standard fork length for oversized pallets, lumber, pipe, and other freight that overhangs a standard fork.

Coils, Drums & Rolls

Coil rams and drum/carriage-mounted attachments pick up rolls, coils, and drums that have no pallet and no flat surface for a fork to slide under.

Unbalanced & Secured Loads

Lifting tongs, spreader beams, and tie-down clamps handle irregular, wide, or off-center loads and keep them secured once they're on the move.

Why It Matters

Capability Without Buying Another Forklift

No New Forklift Required

Every attachment here mounts to a forklift that's already on the floor: the truck doesn't change, only what it's able to pick up.

Capacity Has To Match The Truck

An attachment's rated capacity is only good up to what the forklift itself is rated for: the two have to be matched, not assumed compatible.

Built For One Job, Not Every Job

A coil ram doesn't do what a spreader beam does. These are purpose-built for a specific load type, not general-purpose add-ons.

Tell us the forklift and the load.

Send us your forklift's capacity plate and what you're trying to lift, carry, or secure and we'll match the right attachment and quote it.

Request a Quote
Showing 25–35 of 35 products
1 2

Not sure which system fits your operation?

Send your loads, footprint, ceiling height, and throughput goals. A specialist returns a layout with capacities, a drawing, and lead times.

Request a Layout 1-800-445-4082
One Truck, More Than One Job

One Truck, More Than One Job

A forklift with bare forks handles palletized freight and not much else. The moment a load doesn't sit on a pallet (a coil, a drum, an oversized casting, freight that needs to be strapped down) the truck needs an attachment built for that specific job, not a workaround.

That's the range covered here: fork extensions for reach, coil rams and tongs for loads with no pallet under them, spreader beams for wide or unbalanced freight, and tie-down clamps for keeping it all secured once it's moving. Each one is a purpose-built tool, not a general accessory.

Capacity Matching Is Not Optional

Capacity Matching Is Not Optional

Every attachment on this page carries a rated capacity, and that rating only means something in combination with the forklift it's mounted on. An extension or spreader beam that shifts the load center further out changes what the truck can safely lift (sometimes significantly) even when the attachment itself is rated higher.

That's the reason this whole category routes to a quote instead of a checkout button. We confirm the forklift model and rated capacity before recommending an attachment, so what gets ordered is actually rated for the job it's going to do.

Forklift Attachments & Accessories

Key Features

  • Fork extensions, including loop-style, for longer and wider load reach
  • Fork extension storage racks for organized, off-floor storage between uses
  • Coil rams and lifters for steel, paper, and rubber rolls
  • Heavy-duty die lifting tongs for irregular loads without a pallet
  • Telescoping adjustable spreader beams for wide or unbalanced loads
  • Forklift tie-down clamps for securing loads in transit
  • Drum- and carriage-mounted attachments for cylindrical loads
  • Capacity-rated and matched to the forklift's rated load, not sold generic

Frequently Asked Questions

Capacity has to be matched on both ends: the attachment's rated capacity and the forklift's rated load at the load center the attachment creates. Adding an attachment can change the effective load center, which changes what the truck can safely lift. Send us your forklift's capacity plate and the load you're handling and we'll confirm the match before you order.
Often, yes. Extending the load center further from the truck typically derates the forklift's effective capacity, even though the extensions themselves are rated for a higher number. This is exactly why we quote instead of listing a flat price: the real capacity depends on your specific truck and how far out the load sits.
These attachments are capacity-rated and have to be matched to a specific forklift model and the load you're moving. A listed price without that match gives you a number that may not reflect what your equipment can actually handle. We quote based on your forklift's capacity plate and the load in question so the number you get is accurate.
Yes: coil rams, lifting tongs, and drum/carriage-mounted attachments are built for exactly that. They pick the load up directly instead of relying on a pallet, which is the point of this category as a whole.

Ready to Get a Quote?

Pricing, a layout, or a straight answer from our team. Pick the fastest path.

Get a Custom Quote

Bulk orders, custom configurations, project pricing. We'll send a written quote within one business day.

Request a Quote

Buyer's Guides

Planning guides for storage layouts, shelving, and equipment selection.

Browse the Buyer's Guide

Talk to a Specialist

Not sure what fits your space or your load? Real people who know the equipment, on the phone.

Contact Us

Material Handling Knowledge

Guides, planning resources, and industry insights from our team.

View all guides

  • Selective vs. Drive-In vs. Push-Back Racking

    Weigh storage density against pallet access for your SKU mix, and pick the racking type that matches how your operation actually picks.

    READ MORE

  • Dock Levelers, Lifts and Seals: What You Actually Need

    Start with the trucks that actually arrive, then work forward to leveler type, service range, seal versus shelter, and the safety equipment that is not optional.

    READ MORE

  • Sizing a Mezzanine for the Load You Will Carry

    Uniform live load, concentrated load, and rolling load, plus the code items that change the quote after you thought it was settled.

    READ MORE