Home » Ergonomic Workstations & Benches

Catalog 14 products

Ergonomic Workstations & Benches

Adjustable-height workbenches, cantilever workstation bases, and modular anti-fatigue flooring for stations a worker stands at all shift.

Request a Quote Talk to a Specialist

Ergonomic Workstations & Benches

Ergonomic Workstations & Benches

This is the equipment a worker stands at and stands on for a full shift: adjustable-height workbenches in manual and linear actuated versions, a cantilever base kit for building a workstation around the job, modular anti-fatigue floor tiles for wet and dry areas, and a lumbar support stand for standing positions.

Height adjustment is the point of the benches. Manual adjustment suits a station that gets set once for one operator and left alone. Linear actuated adjustment is for benches shared across shifts, or where the same person needs to move between seated and standing during the day.

Underfoot, the flooring is modular tile rather than a rolled mat, so it comes apart when a cell gets rearranged and the same system covers both wet and dry work areas. Tell us the station and the work being done and we will spec the bench, the base, and the floor coverage together.

Built Around the Work, Not the Other Way Around

Benches and Flooring

Built Around the Work, Not the Other Way Around

A bench fixed at one height forces every operator into the same posture no matter their reach or what they are handling. Manual and powered height adjustment both solve that, and the cantilever base kit goes a step further by letting a workstation get assembled to a specific job instead of bought as a finished unit.

Modular floor tiles do the job of an anti-fatigue mat but lift out and go back when the layout changes. One tile system covers the wet side and the dry side, which keeps you from stocking two different floor products for one building.

Applications

Where This Gets Used

Standing Workstations

Anti-fatigue matting graded for general standing, welding sparks, or grease and oil: matched to the floor condition at the station.

Adjustable Benches & Tables

Height-adjustable workbenches and tables configured to the worker, the task, and the top material the job requires.

Seating & Sit/Stand

Ergonomic seating, footrests, worker platforms, and sit/stand equipment for stations where standing all shift isn't the answer.

Why It Matters

Matched to the floor, sized to the station

Matting Graded to the Environment

General standing, weld-spark-resistant, and grease/oil-resistant grades: picked for the floor condition, not a single catch-all mat.

Benches Configured, Not Boxed

Height-adjustable benches and tables are built to the height, top material, and layout the station actually needs.

Built for Full-Shift Work

Seating, footrests, and sit/stand equipment give workers at a fixed station a way to shift position over a long shift.

Tell us about the station.

Send us the floor condition and the work being done and we'll match the matting grade, bench configuration, or seating that fits, quoted to spec.

Request a Quote

Not sure which system fits your operation?

Send your loads, footprint, ceiling height, and throughput goals. A specialist returns a layout with capacities, a drawing, and lead times.

Request a Layout 1-800-445-4082
The Mat Has to Match the Floor

The Mat Has to Match the Floor

A general anti-fatigue mat dropped at a welding station burns through fast. A grease-rated mat on a dry packing line is money spent on protection that station doesn't need. The mat has to match what's actually happening on that floor: sparks, standing water, oil, or just hours on a hard surface.

That's why this category splits by grade rather than treating matting as one product: general standing, weld/spark-resistant, and grease/oil-resistant each solve a different problem, and getting the grade right is most of the decision.

A Station Built Around the Worker

A Station Built Around the Worker

Height-adjustable benches, sit/stand equipment, seating, and footrests all point at the same idea: a fixed station shouldn't force one body position on everyone who works it. A bench that adjusts, a chair rated for industrial use, or a footrest at a standing station gives workers a way to change position over a long shift instead of holding one the whole time.

None of this is off-the-shelf. Bench height, worktop material, and seating type all get configured to the actual station, which is why every build here starts with a quote, not a cart.

Ergonomic Workstations & Benches

Key Features

  • Manual adjustable-height ergonomic workbenches
  • Linear actuated powered height-adjustable bench
  • Cantilever workstation base kit for custom bench builds
  • Modular anti-fatigue floor tiles for wet and dry workstations
  • Lumbar support stand for standing positions

Frequently Asked Questions

It comes down to the floor condition. Dry, general standing areas need standard anti-fatigue matting. Welding or cutting stations need spark-resistant matting so hot slag doesn't burn through. Machining, food processing, or any wet/greasy floor needs a grease- and oil-resistant grade. Tell us the environment and we'll match the mat to it.
Both are available depending on the line. Manual adjustable benches cost less and work fine for stations that don't change height often; powered sit/stand options make sense where the same station rotates between multiple workers or tasks through a shift.
Yes: worktop material, size, and height are all configured to the job, whether that's a laminate top for general assembly, an ESD-safe top for electronics work, or a steel or butcher block top for heavier use.
Matting is sold by roll or cut size and benches are configured to height and top material, so pricing depends on the specifics of your order. Send us the floor condition or bench spec and we'll get you a quote.

Ready to Get a Quote?

Pricing, a layout, or a straight answer from our team. Pick the fastest path.

Get a Custom Quote

Bulk orders, custom configurations, project pricing. We'll send a written quote within one business day.

Request a Quote

Buyer's Guides

Planning guides for storage layouts, shelving, and equipment selection.

Browse the Buyer's Guide

Talk to a Specialist

Not sure what fits your space or your load? Real people who know the equipment, on the phone.

Contact Us

Material Handling Knowledge

Guides, planning resources, and industry insights from our team.

View all guides

  • Selective vs. Drive-In vs. Push-Back Racking

    Weigh storage density against pallet access for your SKU mix, and pick the racking type that matches how your operation actually picks.

    READ MORE

  • Dock Levelers, Lifts and Seals: What You Actually Need

    Start with the trucks that actually arrive, then work forward to leveler type, service range, seal versus shelter, and the safety equipment that is not optional.

    READ MORE

  • Sizing a Mezzanine for the Load You Will Carry

    Uniform live load, concentrated load, and rolling load, plus the code items that change the quote after you thought it was settled.

    READ MORE