Home » Machine Guarding

Catalog 10 products

Machine Guarding

Machine guards, welded wire enclosures, and perimeter guard systems that keep people out of reach of moving equipment.

Request a Quote Talk to a Specialist

Guards and Enclosures

Machine Guards and Perimeter Enclosures

Machine guarding is the physical barrier between a person and a moving machine. What is on this page goes around presses, conveyors, robotic cells and anything else with a pinch point, a rotating part or a stroke someone can reach into.

The systems here come in a few forms. All-welded steel guards are one fixed piece, built for a spot where the guard goes in and stays. Modular and adjustable perimeter systems build a fence line out of panels and posts, so you can size an enclosure to the machine and change it later. Lift-off and lift-out systems use panels that come out by hand when maintenance needs to get behind them, instead of unbolting the whole run. Welded wire panels enclose a robotic cell while keeping sightlines into it.

High profile and low profile machinery guards cover the two common heights, either a full standing barrier around the equipment or a lower guard where an operator still works over the top of it. Foot guards, wheel guards and toe guards are the small end of the same idea, mounted low on powered trucks and mobile equipment to keep feet clear of the wheels.

Picking the Right Guard System

Fixed or Modular

Picking the Right Guard System

If the guard is going in one place and staying there, an all-welded steel guard is the simplest answer. Nothing to loosen, nothing to reconfigure. If the layout is likely to move, or someone has to get behind the barrier to service the machine, a modular or lift-off system pays for itself the first time a panel has to come out and go back without rebuilding the enclosure.

Tell us the machine, the hazard and how often someone needs access behind the guard. That is usually enough to narrow it to one system and lay out the panel run.

Applications

What Gets Guarded

Machinery & Equipment

Enclose moving parts, belts, and pinch points on equipment so operators and passing foot traffic can't make contact with a hazard.

Rack & Structure Protection

Column guards, rack guards, and corner guards absorb impact from forklifts and carts, protecting the structure and the vehicle both.

Walkways & Access Points

Barriers, safety nets, and edge protection keep foot traffic separated from vehicle paths and elevated or open hazards.

Why It Matters

The barrier between a person and a hazard

Fits What You Already Have

Most guarding retrofits onto existing equipment, racking, or structures: no rebuild, no downtime beyond the install itself.

Scaled to the Hazard

From full machinery enclosures to a single corner guard, the product matches the actual risk, not a one-size-fits-all panel.

Often the Cheapest Safety Win

Point-protection items like rack guards and column protectors cost a fraction of the damage or downtime they prevent.

Tell us what you're guarding.

Send us the equipment, structure, or hazard and we'll recommend the right guard, barrier, or panel, or quote a full-facility retrofit.

Request a Quote

Not sure which system fits your operation?

Send your loads, footprint, ceiling height, and throughput goals. A specialist returns a layout with capacities, a drawing, and lead times.

Request a Layout 1-800-445-4082
One Category, Many Different Hazards

One Category, Many Different Hazards

Machine guarding isn't a single product: it's a response to whatever hazard is actually present. A rotating shaft needs an enclosure; a rack corner facing an aisle needs a guard; a walkway edge over an open area needs a net or barrier. The common thread is a person and a hazard that need something reliable between them.

That variety is why this page covers everything from full machinery panels to a single stocked corner guard: the right product is determined entirely by what's being protected, not by a single category standard.

The Fast, Cheap Wins Add Up

The Fast, Cheap Wins Add Up

Point-protection guards (rack guards, column protectors, corner guards) are some of the least expensive items in this whole catalog, and some of the fastest to add. A facility that's been running without them is usually one forklift incident away from finding out what they cost to skip.

Bright safety-yellow finishing isn't just tradition: it marks the protected zone for anyone operating equipment nearby, which cuts down on the number of impacts in the first place.

Machine Guarding

Key Features

  • All-welded steel guards for fixed, permanent installations
  • Modular and adjustable perimeter systems sized to the machine
  • Lift-off and lift-out panels for maintenance access without dismantling the run
  • Welded wire panels for robotic cells where visibility matters
  • Foot, wheel and toe guards for powered trucks and mobile equipment

Frequently Asked Questions

Machine guarding typically means enclosing or barriering a moving hazard: belts, gears, pinch points on equipment. Rack and column protection is about absorbing impact from vehicles hitting a fixed structure. Both fall under this category because they solve the same core problem: keeping people and equipment safe from a specific hazard.
Point-protection items like rack guards, column protectors, and corner guards are typically stocked to standard dimensions. Full machinery enclosures are more often custom-fit to the specific equipment. Tell us what you're guarding and we'll confirm which applies.
Fast: these are bolt-on retrofit items with no structural modification needed. It's one of the quickest safety upgrades available for a facility running without them.
Yes, case pricing is available for outfitting every aisle, rack row, or column at once, which is usually more efficient than adding guards one incident at a time.

Ready to Get a Quote?

Pricing, a layout, or a straight answer from our team. Pick the fastest path.

Get a Custom Quote

Bulk orders, custom configurations, project pricing. We'll send a written quote within one business day.

Request a Quote

Buyer's Guides

Planning guides for storage layouts, shelving, and equipment selection.

Browse the Buyer's Guide

Talk to a Specialist

Not sure what fits your space or your load? Real people who know the equipment, on the phone.

Contact Us

Material Handling Knowledge

Guides, planning resources, and industry insights from our team.

View all guides

  • Selective vs. Drive-In vs. Push-Back Racking

    Weigh storage density against pallet access for your SKU mix, and pick the racking type that matches how your operation actually picks.

    READ MORE

  • Dock Levelers, Lifts and Seals: What You Actually Need

    Start with the trucks that actually arrive, then work forward to leveler type, service range, seal versus shelter, and the safety equipment that is not optional.

    READ MORE

  • Sizing a Mezzanine for the Load You Will Carry

    Uniform live load, concentrated load, and rolling load, plus the code items that change the quote after you thought it was settled.

    READ MORE