Catalog 4 products

Machine Guarding Components

Posts, wire mesh panels, and door kits for extending, reconfiguring, or repairing an installed machine guarding system.

System Parts

Machine Guarding Components

These are the individual pieces a machine guarding system is built from, not standalone guards. Posts, wire mesh panels, and door kits belong here because most people looking for them already have guarding in place and need to add a bay, change a run, or replace a piece that took a hit.

A guarding run comes down to posts and panels. The posts set the spacing and carry the panels between them, and the mesh panels are the barrier itself. Door kits are how people and equipment get through the run: a hinged door swings and needs clearance to open, a sliding door travels along the run and is the usual answer where there is nothing to swing into.

If you are specifying an enclosure from scratch rather than adding to one, start on the Machine Guarding page and we will work back to the component list from there.

Matching Parts to an Existing Run

Adding or Replacing

Matching Parts to an Existing Run

Guarding components are system specific. Post spacing, panel size, and the mounting hardware have to match what is already standing or the new section will not line up with the old one. Send a photo of an existing post and panel connection along with the run you need, and we will work out the part list.

Doors are worth settling early. Swing clearance, cart width, and where people actually walk decide whether a hinged or a sliding kit belongs at an opening, and that is a much easier call before the run goes up than after.

Not sure which system fits your operation?

Send your loads, footprint, ceiling height, and throughput goals. A specialist returns a layout with capacities, a drawing, and lead times.

Machine Guarding Components

Key Features

  • Posts, wire mesh panels, and door kits sold as individual components
  • Hinged door kits for openings with room to swing
  • Sliding door kits where swing clearance is not available
  • For extending, reconfiguring, or repairing an installed guarding system
  • Complete guards and enclosures live on the Machine Guarding page

Ready to Get a Quote?

Pricing, a layout, or a straight answer from our team. Pick the fastest path.

Get a Custom Quote

Bulk orders, custom configurations, project pricing. We'll send a written quote within one business day.

Request a Quote

Buyer's Guides

Planning guides for storage layouts, shelving, and equipment selection.

Browse the Buyer's Guide

Talk to a Specialist

Not sure what fits your space or your load? Real people who know the equipment, on the phone.

Contact Us

Material Handling Knowledge

Guides, planning resources, and industry insights from our team.

  • Manual vs Electric Chain Hoist: Capacity, Lift, Speed and Power to Check First

    Choosing between a manual and an electric chain hoist comes down to how often you lift, how far, how fast, and whether you have power where the load is.

    READ MORE
  • Data Center Cage Specs: What to Send Before You Request a Quote

    A data center cage quote starts with six specs: footprint, height, mesh, doors, locks, and where cables and air need to pass.

    READ MORE
  • Gantry Crane vs Jib Crane: How to Pick Overhead Lifting Without a Bridge Crane

    The gantry crane vs jib crane choice comes down to one question: does the lift happen at one fixed spot, or does it need to move around the shop?

    READ MORE