The gantry crane vs jib crane choice comes down to one question: does the lift happen at one fixed spot, or does it need to move around the shop?
The short version: where does the lift happen?
You need to lift a motor, a die or a loaded tote, and there is no bridge crane in the ceiling. A jib crane suits a lift that always happens at the same workstation. A gantry crane suits a lift point that moves, or a building where you cannot anchor into the floor or wall. Get that one answer right and most of the other choices follow.
Why gantry cranes and jib cranes solve different problems
A jib crane is a boom that swings around a mast or a wall bracket. It covers a circle or an arc at one station, like a machine, a press or a loading bay.
A gantry crane is a beam on two legs. It straddles the load, and on casters a portable gantry rolls to wherever the work is.
Neither one needs the runway a bridge crane (also called an overhead crane) runs on. That runway hangs from the building structure, so the building has to be able to carry it. Before you compare models, learn four terms:
- Span: the distance the beam covers between gantry legs, or the reach of a jib boom.
- Height under beam: the clear space from the floor to the underside of the beam.
- Rotation: how far a jib boom swings, from a partial arc to a full circle.
- Footprint: the floor space the crane takes up, including legs or the mast base.
What you'll need before you choose
- The heaviest load you will lift, plus the weight of rigging and the hoist
- The height you need under the beam, measured to the lowest overhead obstruction
- Where the lifts happen: one station, several stations, or anywhere on the floor
- Slab thickness and condition, if you are looking at a floor-mounted jib
- Wall or column details, if you are looking at a wall jib
- Whether the crane has to move between bays, buildings or job sites
Gantry crane vs jib crane: how to choose, step by step
- Map the lift points. Mark every spot on the floor where something gets lifted. If it is one machine or one bench, a jib crane covers it with the least floor space. If the lift moves from bay to bay, a portable gantry crane follows the work.
- Check what the building can carry. A floor-mounted jib depends on the slab under its base. A wall jib depends on the wall or column it bolts to. A gantry carries its load through its own legs, so it suits a leased building or a slab you cannot anchor into.
- Match the coverage shape. A jib crane sweeps an arc around its mast. A gantry crane covers a rectangle along its span, plus anywhere you roll it. If your work area is long and narrow, the gantry shape usually fits better.
- Pick the gantry material and height. A fixed height aluminum gantry is light enough to set up by hand and rolls to a new spot once the load is off. Steel gantries come in fixed, adjustable and portable styles, and all of them roll on locking casters. An adjustable height aluminum gantry resets its beam height between jobs, using a forklift or overhead lifting device.
- Choose the hoist and trolley. Both crane types take a chain hoist on a trolley. Rate the whole setup to the lowest of the three ratings: crane, trolley and hoist. A higher-rated hoist does not raise the crane's rating.
- Confirm the rated capacity before you order. Every model lists its own capacity, span and height on the product page. Check those numbers against your heaviest load, and send them to us with your quote request so we can confirm the fit.
When to talk to us before you buy
Talk to us first if a load sits near the top of a model's rating, has an awkward shape, or passes over people or production. A qualified engineer should confirm a slab or wall can take a jib, and we can share the manufacturer's base or bracket specs. With several lift points, a free-standing runway system on its own frame, or a second crane, can beat rolling one gantry around all day. Request a Quote with the load, the height and a sketch of the floor.
Frequently Asked Questions
Q: Can a portable gantry crane be used indoors and outdoors? A: Some can. It depends on the model, the casters and the surface it rolls on. Check the product page for the casters and the surface they suit. Portable gantries are moved when unloaded, so plan where each load gets picked up and set down.
Q: Is an overhead crane the same as a bridge crane? A: In most shops, yes. Both terms usually mean a crane that runs on a runway mounted to the building. Gantry cranes and jib cranes do not need that runway, which is why they suit buildings without one.
Q: Which is more portable, a gantry crane or a jib crane? A: A portable gantry crane, in most cases. It rolls on casters and can be moved between bays. Portable jib cranes exist too, on a base a forklift can move, but they still serve one spot at a time.
Q: How often should a gantry or jib crane be inspected? A: Follow the manufacturer's manual and the inspection rules that apply to your site. Frequency depends on how hard the crane works and where it works, so set the schedule with whoever owns safety at your facility.
Next step: send us the load and the layout
Pick by where the lift happens, then check the building and the rating. We ship nationwide, and Net-30 terms and tax-exempt orders are available. Browse our gantry cranes and jib cranes, then Request a Quote with your heaviest load, the height you need under the beam and a sketch of the lift points.