Home » Load Lifters & Attachments

Catalog 34 products

Load Lifters & Attachments

Manual and powered stackers, drum and tote lifters, vacuum and air-balance units, and rigging attachments for the loads a standard forklift or crane can't handle cleanly.

Request a Quote Talk to a Specialist

Specialty Lifting & Positioning

Load Lifters & Attachments

This is the equipment you reach for when a standard forklift or overhead crane isn't the right tool for the job, a drum that needs to be tipped and poured, a tote that needs lifting without a pallet under it, a load that has to be positioned at working height for an assembler instead of set down on the floor. It's a broad line on purpose: manual and powered stackers, portable hand-winch lifters, vacuum and air-balance units, drum lifters and positioners, tote and bag lifters, work positioners, and the tow hitches and forklift-mounted attachments that adapt a truck you already own to a load it wasn't built to handle.

Because the category spans that much ground, the right piece of equipment depends entirely on the load: its weight, its shape, how it needs to be oriented, and how often it moves. A narrow-mast powered stacker and an air-balance jib lifter solve completely different problems even though both fall under "lifting equipment." We spec by application, not by browsing a catalog page, tell us what you're lifting and how, and we'll point you to the right model and confirm capacity before anything ships.

Manual Stackers, Powered Stackers, or Air-Balance: Matched to Cycle Rate

Manual, Powered, or Air-Balanced

Manual Stackers, Powered Stackers, or Air-Balance: Matched to Cycle Rate

Manual stackers and hand-winch lifters make sense for occasional lifts at moderate heights where an operator can crank a load into position, low cost, no charging, no maintenance beyond the mast and chain. Powered stackers (narrow mast, double mast, or bale-clamp equipped) take over once you're cycling loads repeatedly through a shift, need higher lift heights, or the load itself is too heavy to winch by hand. Vacuum lifters and air-balance jib lifters solve a different problem entirely: precise, low-fatigue positioning of loads that can't be gripped with forks or a hook, sheet stock, cartons, drums, awkward or fragile shapes, where an operator guides the load rather than fighting it.

Capacity and attachment always travel together. A drum lifter rated for a steel 55-gallon drum won't necessarily handle a plastic drum the same way; a tote lifter needs to match your tote's rim or lip style; a forklift-mounted attachment has to match your truck's carriage class and the mast clearance you're working with. That's why this line is quote-only, a few items on this page show a price we've pulled from the manufacturer feed, but treat that as a starting reference, not a number to build a budget around. Send us the load and the attachment point and we'll confirm the model and the real number.

Applications

Where These Lifters Earn Their Keep

Drum, Tote & Bag Handling

Drum lifters, drum positioners, tote lifters, and bag lifters move and tip containers that don't sit on a standard pallet: chemical drums, totes headed for a process line, bagged material at a mixing station.

Tight Aisles & Occasional Lifts

Narrow-mast and compact stackers get a pallet or a stack of cartons up to height in aisles and doorways a counterbalanced lift truck can't work in, without the footprint or the cost of a full forklift.

Precision Positioning & Assembly

Vacuum lifters, air-balance jib lifters, and work positioners hold a load at the exact height and orientation an operator needs (assembly stations, palletizing, sheet handling) cutting the lift-and-set fatigue of doing it by hand.

Why Buy From This Line

Matched to the load, not sold off a shelf

Matched to the Actual Load

Capacity, attachment style, and lift height are specified against the load you're moving (drum diameter, tote lip, forklift carriage class), not sold as one-size-fits-all.

Manual Through Powered

The line covers hand-cranked stackers for occasional lifts up through powered narrow-mast, double-mast, and bale-clamp stackers for repeat-cycle work, so you're not overbuying or underbuying for how often the equipment actually runs.

Established Manufacturers

Sourced from established material-handling manufacturers with published capacity and duty-cycle data: we quote the model that's actually rated for your load, not the closest thing in stock.

Tell us what you're lifting.

Load weight, container type, cycle rate, and forklift specs (if an attachment's involved) are all we need to spec the right lifter and send a written quote.

Request a Quote
Showing 25–34 of 34 products
1 2

Not sure which system fits your operation?

Send your loads, footprint, ceiling height, and throughput goals. A specialist returns a layout with capacities, a drawing, and lead times.

Request a Layout 1-800-445-4082
Stackers: Manual to Powered

Stackers: Manual to Powered

A hand-winch stacker earns its keep on occasional lifts: a pallet up to a mezzanine shelf a few times a shift, no charging station, no maintenance beyond the mast. Once the cycle rate climbs or the loads get heavier, a powered stacker takes over: narrow-mast for tight aisles, double-mast for taller lifts, bale-clamp where the load itself needs to be gripped rather than forked.

The right call comes down to how often the equipment runs and how heavy the loads are, not which one looks more capable on paper. We'll ask about your cycle rate and aisle width before recommending a model.

Vacuum, Air-Balance & Drum Handling

Vacuum, Air-Balance & Drum Handling

Vacuum lifters and air-balance jib lifters solve a problem forks can't: precise, low-fatigue positioning of loads that need to be guided into place rather than dropped: sheet stock, cartons, drums, oddly shaped parts. An operator directs the load; the equipment carries the weight.

Drum lifters and positioners handle the tipping and pouring side of the same problem: moving and orienting drums without manual handling. Both categories are attachment-specific, so confirming your container or load profile before ordering is what keeps the equipment from showing up wrong for the job.

Load Lifters & Attachments

Key Features

  • Manual and powered stackers, including narrow-mast, double-mast, and bale-clamp configurations
  • Portable hand-winch lifters for occasional, low-frequency lifts
  • Drum lifters and drum positioners for tipping, pouring, and repositioning drums
  • Tote lifters and bag lifters for containers that don't move on a standard pallet
  • Vacuum lifters and air-balance jib lifters for precise, low-fatigue load positioning
  • Work positioners for holding loads at fixed height and angle during assembly or packing
  • Forklift-mounted lifting attachments that adapt an existing truck to a specialty load
  • Tow hitches and rigging attachments for towing and load-transfer applications
  • Capacity and attachment engineered to your load, not sold as a fixed-spec unit

Frequently Asked Questions

Start with the load, not the equipment name. Tell us what you're lifting (weight, shape, container type), how high it needs to go, and how often it moves through a shift. A drum that gets tipped twice a day needs a different tool than a tote that gets lifted forty times a shift. We'll match you to a model (stacker, vacuum lifter, drum positioner, whatever fits) rather than you guessing from a product list.
Almost everything in this line is capacity- and attachment-dependent: the right drum lifter, tote lifter, or forklift attachment has to match your specific container, carriage, or load profile. A few listings carry a price pulled from the manufacturer feed, but treat that as a rough reference, not a quote. Send us the load details and we'll confirm the correct model and a real number in writing.
A manual stacker is hand-cranked: no battery, no motor, lowest cost, and fine for occasional lifts at moderate height. A powered stacker (narrow-mast, double-mast, or bale-clamp) handles higher lift heights, heavier loads, and repeat cycling through a shift without operator fatigue. If the equipment is running dozens of times a day, powered pays for itself; if it's occasional, manual is usually the right call.
No: forklift attachments have to match your truck's carriage class and mast clearance, and the combined weight of the attachment plus the load affects your truck's rated capacity. Send us your forklift's make, model, and carriage class along with the load you're trying to handle, and we'll confirm fit and capacity before quoting.

Ready to Get a Quote?

Pricing, a layout, or a straight answer from our team. Pick the fastest path.

Get a Custom Quote

Bulk orders, custom configurations, project pricing. We'll send a written quote within one business day.

Request a Quote

Buyer's Guides

Planning guides for storage layouts, shelving, and equipment selection.

Browse the Buyer's Guide

Talk to a Specialist

Not sure what fits your space or your load? Real people who know the equipment, on the phone.

Contact Us

Material Handling Knowledge

Guides, planning resources, and industry insights from our team.

View all guides

  • Selective vs. Drive-In vs. Push-Back Racking

    Weigh storage density against pallet access for your SKU mix, and pick the racking type that matches how your operation actually picks.

    READ MORE

  • Dock Levelers, Lifts and Seals: What You Actually Need

    Start with the trucks that actually arrive, then work forward to leveler type, service range, seal versus shelter, and the safety equipment that is not optional.

    READ MORE

  • Sizing a Mezzanine for the Load You Will Carry

    Uniform live load, concentrated load, and rolling load, plus the code items that change the quote after you thought it was settled.

    READ MORE